FRAMEDETDEL=DEL0, CODING=NRZ, MAPFSK=MAP0, DSSSSHIFTS=NOSHIFT, DIFFENCMODE=DIS, MODFORMAT=FSK2, DSSSDOUBLE=DIS, DEMODRAWDATASEL=DIS, SHAPING=DISABLED
No Description
| FDM0DIFFDIS | Frame Detection Mode 0 disable |
| MAPFSK | Mapping of FSK symbols 0 (MAP0): 4FSK: Symbol 11, 10, 00, 01 for decreasing frequency. 2FSK/MSK/ASK/OOK: Symbol 1 is high/positive frequency or high amplitude, symbol 0 is low/negative frequency or low amplitude. 1 (MAP1): 4FSK: Symbol 01, 00, 10, 11 for decreasing frequency. 2FSK/MSK/ASK/OOK: Symbol 0 is high/negative frequency or high amplitude, symbol 1 is low/negative frequency or low amplitude. 2 (MAP2): 4FSK: Symbol 10, 11, 01, 00 for decreasing frequency. 2FSK/MSK/ASK/OOK: Undefined. 3 (MAP3): 4FSK: Symbol 00, 01, 11, 10 for decreasing frequency. 2FSK/MSK/ASK/OOK: Undefined. 4 (MAP4): 4FSK: Symbol 11, 01, 00, 10 for decreasing frequency. 2FSK/MSK/ASK/OOK: Undefined. 5 (MAP5): 4FSK: Symbol 10, 00, 01, 11 for decreasing frequency. 2FSK/MSK/ASK/OOK: Undefined. 6 (MAP6): 4FSK: Symbol 01, 11, 10, 00 for decreasing frequency. 2FSK/MSK/ASK/OOK: Undefined. 7 (MAP7): 4FSK: Symbol 00, 10, 11, 01 for decreasing frequency. 2FSK/MSK/ASK/OOK: Undefined. |
| CODING | Symbol coding 0 (NRZ): Non Return to Zero 1 (MANCHESTER): Manchester Coding 2 (DSSS): Direct Sequence Spread Spectrum 3 (LINECODE): Line code. Maps 0 to 0011 symbol and 1 to 1100 symbols |
| MODFORMAT | Modulation format 0 (FSK2): Frequency Shift Keying with 2 symbols 1 (FSK4): Frequency Shift Keying with 4 symbols 2 (BPSK): Binary Phase Shift Keying 3 (DBPSK): Differentially encoded Binary Phase Shift Keying 4 (OQPSK): Half Sine Shaped Offset Quadrature Phase Shift Keying 5 (MSK): Minimum Shift Keying 6 (OOKASK): On Off Keying and Amplitude Shift Keying |
| DUALCORROPTDIS | Dual Correlation Optimization Disable |
| OOKASYNCPIN | OOK asynchronous pin mode |
| DSSSLEN | DSSS length |
| DSSSSHIFTS | DSSS shifts 0 (NOSHIFT): No symbols are defined by shifting. 1 (SHIFT1): Next symbol generated by 1 cyclic shift. 2 (SHIFT2): Next symbol generated by 2 cyclic shifts. 3 (SHIFT4): Next symbol generated by 4 cyclic shifts. 4 (SHIFT8): Next symbol generated by 8 cyclic shifts. 5 (SHIFT16): Next symbol generated by 16 cyclic shifts. |
| DSSSDOUBLE | DSSS double 0 (DIS): Doubling is disabled. 1 (INV): Doubling is enabled by using inverted symbols. 2 (CONJ): Doubling is enabled by using complex conjugated symbols. |
| DETDIS | Detection disable |
| DIFFENCMODE | Differential encoding mode 0 (DIS): Differential Encoding is disabled. 1 (RR0): Transmit the XOR-ed value of the Raw symbol and the last Raw symbol. Initial Raw symbol is 0. 2 (RE0): Transmit the XOR-ed value of the Raw symbol and the last Encoded symbol. Initial Encoded symbol is 0. 3 (RR1): Transmit the XOR-ed value of the Raw symbol and the last Raw symbol. Initial Raw symbol is 1. 4 (RE1): Transmit the XOR-ed value of the Raw symbol and the last Encoded symbol. Initial Encoded symbol is 1. |
| SHAPING | Shaping filter 0 (DISABLED): Filter disabled. 1 (ODDLENGTH): Filter has odd length. Filter uses coefficients 0,1,2,3,4,5,6,7,8,7,6,5,4,3,2,1,0. 2 (EVENLENGTH): Filter has even length. Filter uses coefficients 0,1,2,3,4,5,6,7,7,6,5,4,3,2,1,0. 3 (ASYMMETRIC): Filter has asymmetrical coefficients. Filter uses coefficients 0,1,2,3,4,5,6,7. |
| DEMODRAWDATASEL | Demod raw data select 0 (DIS): Disabled. 1 (ENTROPY): 1-bit entropy source extracted from the RF receive chain, to be used for random number generation. 2 (ADC): 2 * 3-bit I and Q ADC data. 3 (FILTLSB): 2 * 16-bit I and Q channel filtered data downmixed to zero-IF. The receive signal chain has 19 bits dynamic range at this point, and the FILTLSB setting outputs the 16 least significant bits (with saturation). 4 (FILTMSB): 2 * 16-bit I and Q channel filtered data downmixed to zero-IF. The receive signal chain has 19 bits dynamic range at this point, and the FILTMSB setting outputs the 16 most significant bits (with truncation). 5 (FILTFULL): 2 * 19-bit I and Q channel filtered data downmixed to zero-IF. The FILTFULL option will output all 19 bits of dynamic range, sign extended to 32 bits. 6 (FREQ): 8-bit received frequency data (or logarithmic amplitude for ASK/OOK). 7 (DEMOD): 8-bit demodulated data (freq/amp/phase). When coherent detection is enabled, only the in-phase component is selected. |
| FRAMEDETDEL | FRAMEDET delay 0 (DEL0): No delay 1 (DEL8): 8 baud delay 2 (DEL16): 16 baud delay 3 (DEL32): 32 baud delay |